Semi-exact solution of non-uniform thickness and density rotating disks. Part II: Elastic strain hardening solution |
| |
Authors: | M.H. Hojjati S. Jafari |
| |
Affiliation: | Faculty of Mechanical Engineering, Babol University of Technology, PO Box 484, Babol, Iran |
| |
Abstract: | Analytical solutions for the elastic–plastic stress distribution in rotating annular disks with uniform and variable thicknesses and densities are obtained under plane stress assumption. The solution employs a technique called the homotopy perturbation method. A numerical solution of the governing differential equation is also presented based on the Runge–Kutta's method for both elastic and plastic regimes. The analysis is based on Tresca's yield criterion, its associated flow rule and linear strain hardening. The results of the two methods are compared and generally show good agreement. It is shown that, depending on the boundary conditions used, the plastic core may contain one, two or three different plastic regions governed by different mathematical forms of the yield criterion. Four different stages of elastic–plastic deformation occur. The expansion of these plastic regions with increasing angular velocity is obtained together with the distributions of stress and displacement. |
| |
Keywords: | Rotating annular disk Homotopy perturbation method Tresca's criterion Strain hardening Variable thickness Variable density |
本文献已被 ScienceDirect 等数据库收录! |
|