首页 | 本学科首页   官方微博 | 高级检索  
     

箱梁剪滞效应分析样条有限点法
引用本文:王继兵,周德源,秦荣.箱梁剪滞效应分析样条有限点法[J].沈阳工业大学学报,2010,32(5):596-600.
作者姓名:王继兵  周德源  秦荣
摘    要:为了研究箱梁剪滞效应,以能量变分法为基础提出一种箱梁剪滞效应分析的样条有限点法.对箱梁底板、顶板及悬臂板分设不同的纵向位移差函数,采用二次抛物线作为箱梁翼缘板纵向位移沿梁宽的分布函数,导出相应广义刚度矩阵和广义荷载列阵.分析了简支梁在均布荷载和跨中集中荷载条件下的剪力滞效应,与相应的试验结果和有限元数值模拟结果对比,验证了该方法的有效性和可靠性.

关 键 词:箱型梁  剪滞效应  变分原理  有限单元法  样条有限点法  数值模拟  简支梁  均布荷载  

Spline finite point method for shear lag analysis of box girder
WANG Ji bing,ZHOU De yuan,QIN Rong.Spline finite point method for shear lag analysis of box girder[J].Journal of Shenyang University of Technology,2010,32(5):596-600.
Authors:WANG Ji bing  ZHOU De yuan  QIN Rong
Abstract:In order to study the shear lag effect of box girder, a spline finite point method for analyzing the shear lag effect of box girder was proposed based on energy variational principle. Three longitudinal displacement differential functions were assumed for the top, bottom and cantilever plates of box girder. With adopting the quadratic parabola as the distribution function of longitudinal displacement along girder width, the generalized stiffness matrix and load vector were deduced. The shear lag effect of a simply supported beam under uniformly distributed load and concentrated load was analyzed. The results calculated by finite element method were compared with the experimental results. The validity and reliability of the proposed method get proved.
Keywords:box girder  shear lag effect  variational principle  finite element method  spline finite point method  numerical simulation  simply supported beam  uniformly distributed load  
点击此处可从《沈阳工业大学学报》浏览原始摘要信息
点击此处可从《沈阳工业大学学报》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号