| 冷连轧生产线的速度控制模型研究 |
| |
| 引用本文： | 吴晓辉,耿运祥. 冷连轧生产线的速度控制模型研究[J]. 钢铁研究, 2011, 39(2): 27-29 |
| |
| 作者姓名： | 吴晓辉 耿运祥 |
| |
| 作者单位： | 北京机械工业自动化研究所,北京,100120 |
| |
| 摘 要： | 在秒流量方程的基础上,充分考虑厚度偏差和张力波动对速度的影响,推导并建立了1个冷连轧综合速度控制模型,并根据动态结构图配置了控制器.通过对比仿真研究,进一步优化了控制器参数,在某1 550 mm冷连轧生产应用中,将张力、厚度指标作为控制目标.速度参数作为控制对象,使张力波动从调整前的300 kg减小到目前的90 kg,...
|
| 关 键 词： | 冷连轧 速度控制模型 厚度偏差 张力波动 |
Study of a speed control model for cold tandem mill |
| |
| WU Xiao-hui,GENG Yun-xiang. Study of a speed control model for cold tandem mill[J]. Research on Iron and Steel, 2011, 39(2): 27-29 |
| |
| Authors: | WU Xiao-hui GENG Yun-xiang |
| |
| Affiliation: | (Beijing Research Institute of Automation for Machine-Building Industry,Beijing 100120,China) |
| |
| Abstract: | On the basis of the mass flow equation and consideration of effects of thickness deviation and tension on rolling speed,a speed control model for cold tandem mill has been established.The configuration of controllers is implemented according to its dynamic chart.The parameters of the controller are further optimized based on simulation results.This model has been applied successfully in rolling process for a 1 550 mm cold tandem mill.The deviation of tension decreased from 300 kg to 90 kg,the error of thickness reduced from ±5 μm to ±4 μm.In addition,the dynamic response and strip shape were improved obviously. |
| |
| Keywords: | cold tandem mill speed control model thickness deviation tension fluctuation |
| 本文献已被 维普 万方数据 等数据库收录！ |
|
