| 超小功率金卤灯电弧管缩颈泡壳成形工艺与设备研究 |
| |
| 引用本文： | 何荣开,赵坚玉,刘鹏. 超小功率金卤灯电弧管缩颈泡壳成形工艺与设备研究[J]. 照明工程学报, 2007, 18(1): 71-74 |
| |
| 作者姓名： | 何荣开 赵坚玉 刘鹏 |
| |
| 作者单位： | 东南大学电光源研究中心 南京210096 |
| |
| 摘 要： | 超小功率高强度气体放电灯电弧管电极极间距误差要求小,二电极对中要求高,所以采用在电弧管泡壳两端加缩颈来定位电极。本文介绍电弧管泡壳成形、缩颈工艺和设备的研究。
|
| 关 键 词： | 电弧管缩颈泡壳 泡壳成形工艺 缩颈工艺 超小功率金卤灯 |
The Research of Technology and Equipment of the Electric Arc Tube''''s Shell with Neck Shaped and Shrank |
| |
| He Rongkai,Zhao Jianyu,Liu Peng. The Research of Technology and Equipment of the Electric Arc Tube''''s Shell with Neck Shaped and Shrank[J]. China Illuminating Engineering Journal, 2007, 18(1): 71-74 |
| |
| Authors: | He Rongkai Zhao Jianyu Liu Peng |
| |
| Affiliation: | Research Center For Electric Light Sources, Southeast University, Nanjing 210096 |
| |
| Abstract: | The shaped technique of the electric arc tube's shell with neck, which is used in the small power metal-halide lamp, is introduced in this paper. The electric arc tube's shell shaped and neck shrank method is put forward according as the quartz glass characteristic. |
| |
| Keywords: | the electric arc tube's shell with neck the wheel-mold shrank technology the small power metal-halide lamp |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
