| KYN—10P型触头盒模塑工艺探讨 |
| |
| 引用本文： | 王颖. KYN—10P型触头盒模塑工艺探讨[J]. 工程塑料应用, 1998, 26(6): 11-13 |
| |
| 作者姓名： | 王颖 |
| |
| 作者单位： | 哈尔滨迅达玻璃钢厂;150078; |
| |
| 摘 要： | 针对当前真空断路器触头盒工频耐压不合格的问题,重新确立DMC模塑工艺,并采取特殊加工技术,使产品工频耐压合格率达到百分之百。
|
| 关 键 词： | 触头盒 工频耐压 模塑工艺 |
DISCUSSION ON MOULDING TECHNOLOGY OF KYN-10 P TYPE CONTACT BOX |
| |
| Wang Ying. DISCUSSION ON MOULDING TECHNOLOGY OF KYN-10 P TYPE CONTACT BOX[J]. Engineering Plastics Application, 1998, 26(6): 11-13 |
| |
| Authors: | Wang Ying |
| |
| Affiliation: | Harbin Xunda FRP Factory 150078 |
| |
| Abstract: | To counter the question that the power frequency voltage resistance test of a contact box for a vacuum breaker is not up to the standard at present, a moulding technology system of DMC is redetermined. And a special technology of process is adopted to make the product quality meet the requirement of the national standard. |
| |
| Keywords: | contact box power frequency voltage resistance moulding technology |
| 本文献已被 CNKI 维普 等数据库收录！ |
