| Abstract: | With polydopamine (PDA) acting as interlayer, combined with electrospinning technology and a silanization method, here a versatile method for fabricating a superhydrophobic PES/PDA/ODTS fibrous mat is reported. Scanning electron microscopy, attenuated total reflection Fourier transform infrared spectroscopy, and contact angle measurements were applied to characterize the morphologies and chemical composition changes of the prepared fibrous mats. Their separation ability for oil/water mixtures was measured by self‐made instruments. The results show that the fabricated PES/PDA/ODTS fibrous mat displays a water contact angle too large to be assessed by the ordinary amount of water applied in a conventional measurement. In other words, a water drop of less than 10 μL adheres to the syringe needle and leaves with it during the measurement. The prepared PES/PDA/ODTS fibrous mat also shows a threshold sliding angle no more than 2.5°. At the same time, this kind of material exhibits superoleophilicity for organic solvents, such as n‐hexane, gasoline, toluene, and chloroform. The experimental contact angles were also analyzed using the Cassie–Baxter model to gain insights into the fundamental microstructure–wetting property relationship. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 45923. |
