| 非圆曲线轮廓数控加工编程误差的控制 |
| |
| 引用本文： | 何其宝. 非圆曲线轮廓数控加工编程误差的控制[J]. 机械制造与自动化, 2006, 35(5): 72-73,76 |
| |
| 作者姓名： | 何其宝 |
| |
| 作者单位： | 安徽六安职业技术学院,安徽,六安,237158 |
| |
| 摘 要： | 非圆曲线轮廓的数控加工是加工中的难点问题，容易造成加工零件的品质缺陷。究其原因：一方面是由于操作人员加工前的操作准备不当，另一方面是由于复杂曲线轮廓编程误差所致。编程谟差一般易被忽视，这里就编程误差控制，来探讨非圆曲线轮廓加工的误差控制措施。
|
| 关 键 词： | 数控加工 编程误差 非圆曲线 |
| 文章编号： | 1671-5276（2006）05-0072-02 |
| 收稿时间： | 2006-04-20 |
| 修稿时间： | 2006-04-20 |
Programmed Error''''s Control in the no Circularity Curve Figure Numerical-Control Machine |
| |
| HE Qi-bao. Programmed Error''''s Control in the no Circularity Curve Figure Numerical-Control Machine[J]. Machine Building & Automation, 2006, 35(5): 72-73,76 |
| |
| Authors: | HE Qi-bao |
| |
| Abstract: | It is very difficult to machine the noncircular curve by numerical control. It easily makes quality defect of a part. On the one hand, it is caused by the improperly-prepared operators before the machining; on the other hand, it is caused by the complex curve programming error. Programming error is easily ignored. The error control measares are studied here. |
| |
| Keywords: | numerical control machining programming error noncircular curve |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
