| 注射成型CAE分析结果的评价方法 |
| |
| 引用本文： | 李宏生,郭志英,李德群.注射成型CAE分析结果的评价方法[J].中国塑料,2005,19(10):64-69. |
| |
| 作者姓名： | 李宏生 郭志英 李德群 |
| |
| 作者单位： | 上海交通大学塑性成形工程系，上海交通大学塑性成形工程系，华中科技大学 上海 200030，上海 200030，湖北 武汉 430074 |
| |
| 摘 要： | 为了有效利用注射成型CAE分析结果、降低对分析员的知识水平要求、提高对结果评价的准确性,对注射成型CAE分析结果的评价方法进行了系统的研究。依据不同的角度,对评价方法进行了分类。以统计方法和模糊理论为基础,结合注射成型CAE分析的代表性软件Moldflow,按照评价方法的分类顺序详细讨论了各种评价方法的特点、优缺点、应用和适用性。这些评价方法有效解决了注塑CAE分析结果得不到充分利用的问题,提高了注塑 CAE分析软件的易用性。
|
| 关 键 词： | 注射成型 计算机辅助工程 分析结果 评价方法 |
| 文章编号： | 1001-9278（2005）10-0064-06 |
| 收稿时间： | 2005-06-30 |
| 修稿时间： | 2005-06-30 |
Evaluative Methods of Results of CAE Analysis for Injection Molding |
| |
| LI Hong-sheng, GUO Zhi-ying, LI De-qun.Evaluative Methods of Results of CAE Analysis for Injection Molding[J].China Plastics,2005,19(10):64-69. |
| |
| Authors: | LI Hong-sheng GUO Zhi-ying LI De-qun |
| |
| Affiliation: | 1. Department of Plasticity Technology, Shanghai Jiao Tong University, Shanghai 200030, China; 2. Huazhong University of Science and Technology,Wuhan 430074, China |
| |
| Abstract: | The evaluation methods of CAE-analysis results are investigated systematically in order to eliminate the effects caused by different individuals and to improve the accuracy of evaluation. The evaluative methods were categorized according to various rules. Based on statistic method and vague theory and helped with an CAE software Moldflow, the characteristics, advantages and limitations, application and applicability of the evaluative methods were discussed. These methods solved the problem that results of CAE analysis can't be used effectively. They improve easiness of CAE software of injection molding. |
| |
| Keywords: | injection molding computer assisted engineering analysis result evaluative method |
| 本文献已被 CNKI 维普 等数据库收录！ |
