| 基于Pro／Engineer平台的装配件三维参数化造型技术 |
| |
| 引用本文： | 李洲洋,陈国定.基于Pro／Engineer平台的装配件三维参数化造型技术[J].工程设计学报,2004,11(4):211-213. |
| |
| 作者姓名： | 李洲洋 陈国定 |
| |
| 作者单位： | 西北工业大学,机电学院,陕西,西安,710072 |
| |
| 摘 要： | 采用Pro／Program模块对Pro／Engineer进行二次开发，在Pro／Engineer平台下实现了对装配件的三维参数化造型技术，大大减少了重复造型的工作量，极大地提高了设计效率和设计质量．作为应用实例，对卫星天线的环形桁架进行了研究，并给出了该结构的三维参数化实体模型．
|
| 关 键 词： | 参数化 三维造型 Pro／E 环形桁架结构 |
| 文章编号： | 1006-754X(2004)04-0211-03 |
| 修稿时间： | 2004年5月17日 |
Three-dimensional parametric modeling of assembly based on Pro/Engineer |
| |
| LI Zhou-yang,CHEN Guo-ding.Three-dimensional parametric modeling of assembly based on Pro/Engineer[J].Journal of Engineering Design,2004,11(4):211-213. |
| |
| Authors: | LI Zhou-yang CHEN Guo-ding |
| |
| Affiliation: | Mechanical Engineering College，Northwestern Polytechnical University，Xi’an 710072，China |
| |
| Abstract: | Three-dimensional parametric modeling of assembly was proposed through the re-development of Pro/Engineer by using Pro/Program. By using this technology, the modeling work can be further reduced, and the efficiency and quality of design will be greatly improved. As an example, three-dimensional parametric model of satellite antenna's hoop truss was developed for structure design. |
| |
| Keywords: | parameterization three-dimensional modeling Pro/Engineering hoop truss structure |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
| 点击此处可从《工程设计学报》浏览原始摘要信息 |
|
点击此处可从《工程设计学报》下载全文 |
