PNEUMATIC DRYING IN DILUTED PHASE: PARAMETRIC ANALYSIS OF TUBE DIAMETER AND MEAN PARTICLE DIAMETER |
| |
Authors: | A E A Paix o S C S Rocha |
| |
Affiliation: |
a School of Chemical Engineering, Federal University of Sergipe, Sao Cristovao, SE, Brazil
b School of Chemical Engineering, State University of Campinas, Campinas, SP, Brazil |
| |
Abstract: | In previous work on pneumatic drying presented by the authors, a mathematical model based on the conservation equations of momentum, mass and energy was proposed. This model was developed taking into account axial and radial profiles for gas and solids velocities, pressure and porosity in the drying tube. These dynamic profiles influenced the behavior of temperature in the gas and particulate phases, gas humidity and solids moisture content. In this work, this model has been used to perform a parametric analysis of the tube and panicle diameters in the pneumatic drying process. These variables were analyzed here for fixed conditions of gas and solids flowrates and initial values of temperatures, humidity and moisture content. Factorial planning was applied to the numerical solution of the mathematical model. Experimental data obtained in a pilot scale pneumatic dryer were used as the initial conditions in the simulation to specify the levels of the variables analyzed. Results on the influence of tube diameter and particle diameter on the drying process were obtained by statistical analysis of the responses generated by the factorial planning. |
| |
Keywords: | Pneumatic drying pneumatic transport |
本文献已被 InformaWorld 等数据库收录! |
|