首页 | 本学科首页   官方微博 | 高级检索  
     

声发射源多传感器数据融合识别技术研究
引用本文:李光海,刘正义.声发射源多传感器数据融合识别技术研究[J].无损检测,2003,25(4):171-175.
作者姓名:李光海  刘正义
作者单位:1. 清华大学机械工程系,北京,100084
2. 华南理工大学,机电工程系,广州,510641
基金项目:北京市自然科学基金资助项目 ( 3 0 110 0 1)
摘    要:波形数字声发射技术的发展给声发射源的特性识别带来了可能。噪声的影响和声发射信号传播过程的复杂性给声源的识别带来一定的困难。为了解决干扰情况下声发射源的定性问题,提出了在决策层上的多传感器数据融合的识别方法。利用定位传感器组中各个传感器得到的数据,同时考虑在同一个定位组中各个传感器所得数据的置信度不同,来对声发射源性质进行识别。实验结果证明,数据融合后声发射源特性识别的可靠性明显大于单个传感器,表明了多传感器融合识别的可能性和有效性。

关 键 词:声发射检验  数据处理  识别技术  传感器  数据融合  无损检测
文章编号:1000-6656(2003)04-0171-05
修稿时间:2003年1月16日

MULTISENSOR DATA FUSION TECHNIQUE FOR ACOUSTIC EMISSION SOURCE RECOGNITION
LI Guang,hai.MULTISENSOR DATA FUSION TECHNIQUE FOR ACOUSTIC EMISSION SOURCE RECOGNITION[J].Nondestructive Testing,2003,25(4):171-175.
Authors:LI Guang  hai
Abstract:The development of digital and waveform acoustic emission (AE) technology made the recognition of AE source possible. Because of the noise and the complexity of AE signal transmission characteristics, the recognition of AE source was very difficult. In order to resolve the problem, the method of multisensor data fusion on decision level was presented. Using the data from each sensor in a location set and considering the confidence value for each sensor, AE source characteristics were acquired. Experimental results showed that multisensor data fusion method was more reliable and effective.
Keywords:Acoustic emission testing  Data processing  Recognition technique  Sensor
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号