| 碳化钨-铈钴超细硬质合金制取工艺研究 |
| |
| 引用本文： | 林春芳,孙丹,杜玉国,陈蓓瑾,刘莹华.碳化钨-铈钴超细硬质合金制取工艺研究[J].硬质合金,2010,27(2):88-91. |
| |
| 作者姓名： | 林春芳 孙丹 杜玉国 陈蓓瑾 刘莹华 |
| |
| 作者单位： | 上海材料研究所,上海,200437 |
| |
| 基金项目： | 上海市科学技术委员会应用技术开发专项资金项目 |
| |
| 摘 要： | 以稀土铈-钴预合金(金属间化合物)作为硬质合金液相引发剂,通过加压烧结促进硬质合金致密化,制备了S55牌号超细硬质合金化纤切断刀。合金物理机械性能检测及使用研究结果表明:利用稀土液相引发剂和加压烧结工艺,并辅以合适的晶粒长大抑制剂,可获得超细高硬度、高强度的硬质合金,研发的S55牌号化纤切断刀使用寿命提高一倍以上。
|
| 关 键 词： | 超细硬质合金 低温高压烧结 液相引发剂 稀土预合金 |
Preparation Technology of Ultrafine WC-CeCo Cemented Carbide |
| |
| Lin Chunfang,Sun Dan,Du Yuguo,Chen Beijin,Liu Yinghua.Preparation Technology of Ultrafine WC-CeCo Cemented Carbide[J].Cemented Carbide,2010,27(2):88-91. |
| |
| Authors: | Lin Chunfang Sun Dan Du Yuguo Chen Beijin Liu Yinghua |
| |
| Affiliation: | Lin Chunfang Sun Dan Du Yuguo Chen Beijin Liu Yinghua (Shanghai Material Research Institute, Shanghai 200437 ,China) |
| |
| Abstract: | By using the rare earth cerium-cobalt pre-alloy （intennetallie compound） as hard alloy liquid phase initiator, with the alloy densification is promoted by pressure sintering, the S55 grade ultrafine hard alloy chemical fiber cut-off tool was prepared. The results of the mechanical properties examination and application research indicate that, by using rare earth liquid phase initiator, pressure sintering and appropriate crystal growth inhibitor, the hard alloy with high hardness and strength may be obtained, the service life of the S55 chemical fiber cut--off tool is enhanced above one time. |
| |
| Keywords: | ultratlne hard alloy low temperature and high pressure sintering liquid phase initiator rare earth pre-alloy |
| 本文献已被 维普 万方数据 等数据库收录！ |
|
