| 基于热力循环模拟的喷油器匹配计算 |
| |
| 引用本文： | 李晓杰,张翼,苏铁熊. 基于热力循环模拟的喷油器匹配计算[J]. 中北大学学报(自然科学版), 2009, 30(2): 127-131 |
| |
| 作者姓名： | 李晓杰 张翼 苏铁熊 |
| |
| 作者单位： | 中北大学,机电工程学院,山西太原030051;中北大学,机电工程学院,山西太原030051;中北大学,机电工程学院,山西太原030051 |
| |
| 摘 要： | 在进行某多缸直喷式柴油机喷油器选型时,提出将喷油过程仿真程序HYDSIM和热力循环模拟软件BOOST耦合分析的方法.建立了柴油机喷油过程和工作过程联合仿真模型,进行了喷油过程和工作过程的模拟分析,得出了喷油嘴的优选方案,并进行了试验验证.结果表明:利用所选方案可使柴油机的性能得到改进;所提出的喷油器选型耦合仿真分析方法是可行的,该方法具有一定的工程参考价值.
|
| 关 键 词： | 喷油器 喷油过程模拟 热力过程模拟 |
Matching Computation of Injector Based on Thermodynamic Simulation |
| |
| LI Xiao-jie,ZHANG Yi,SU Tie-xiong. Matching Computation of Injector Based on Thermodynamic Simulation[J]. Journal of North University of China, 2009, 30(2): 127-131 |
| |
| Authors: | LI Xiao-jie ZHANG Yi SU Tie-xiong |
| |
| Affiliation: | School of Mechatronic Engineering;North University of China;Taiyuan 030051;China |
| |
| Abstract: | This paper puts forward an analyzing method of coupling the fuel injection process simulation program HYDSIM with the thermodynamic cycle simulation software BOOST.A diesel engine simulation model which consists of fuel injection process and working process is established.An optimal scheme of the fuel injection is obtained by simulation analysis.Experimental results show that the performance of the diesel engine has been improved by using the selected scheme,the analysis method for the injector is feasible ... |
| |
| Keywords: | fuel injectors injection process simulation thermodynamic simulation |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
