| 立式磨磨盘有限元分析 |
| |
| 引用本文： | 陈作炳,孙亚忠. 立式磨磨盘有限元分析[J]. 武汉理工大学学报, 2011, 0(2): 133-135,147 |
| |
| 作者姓名： | 陈作炳 孙亚忠 |
| |
| 作者单位： | 武汉理工大学机电工程学院; |
| |
| 摘 要： | 通过建立φ4 800 mm磨盘、磨辊直径φ2 600 mm的立式磨虚拟样机模型,分析单辊受力情况,得到磨盘所受极限正压力和摩擦力,利用Hypermesh对磨盘进行精细网格剖分,导入ANSYS中建立其有限元模型,对磨盘结构进行详细的有限元分析和校核,验证了磨盘强度,对磨盘的结构设计具有理论指导意义。
|
| 关 键 词： | 立式磨 磨盘 虚拟样机 有限元分析 |
Finite Element Analysis for Rolling Plate of Vertical Roller Mill |
| |
| CHEN Zuo-bing,SUN Ya-zhong. Finite Element Analysis for Rolling Plate of Vertical Roller Mill[J]. Journal of Wuhan University of Technology, 2011, 0(2): 133-135,147 |
| |
| Authors: | CHEN Zuo-bing SUN Ya-zhong |
| |
| Affiliation: | CHEN Zuo-bing,SUN Ya-zhong(School of Mechanical and Electronic Engineering,Wuhan University of Technology,Wuhan 430070,China) |
| |
| Abstract: | Rolling plate is a key part of vertical roller mill.In this paper,the virtual prototyping of vertical roller mill,of which rolling plate's diameter is 4 800 mm and rolling axis's diameter is 2 600 mm,is established.On the basis of deserving the loads acting on the single grinding roller,the loads and frictions acting on the rolling plate is calculated.The FEM mesh of rolling plate is generated under the pattern of hexahedron SOLID45 cells with Hypermesh,and the FEM model is built with ANSYS.From the result ... |
| |
| Keywords: | vertical roller mill rolling plate virtual prototyping finite element analysis |
| 本文献已被 CNKI 等数据库收录！ |
|
