Influence of oxygen plasma treatment parameters on the properties of carbon fiber |
| |
Authors: | Meysam Baghery Borooj Ehsanollah Nosratian Sabet Aminoddin Haji |
| |
Affiliation: | 1. Textile Engineering Department, Amirkabir University of Technology, Tehran, Iran;2. Textile Engineering Department, Birjand Branch, Islamic Azad University, Birjand, Iran |
| |
Abstract: | This study is focused on the impact of oxygen plasma treatment on properties of carbon fibers and interfacial adhesion behavior between the carbon fibers and epoxy resin. The influences of the main parameters of plasma treatment process, including duration, power, and flow rate of oxygen gas were studied in detail using interlaminar shear strength (ILSS) of carbon fiber composites. The ILSS of composites made of carbon fibers treated by oxygen plasma for 1 min, at power of 125 W, and oxygen flow rate of 100 sccm presented a maximum increase of 28% compared to composites made of untreated carbon fibers. Furthermore, carbon fibers were characterized by scanning electron microscopy (SEM), tensile strength test, attenuated total reflectance Fourier transform infrared (ATR-FTIR), and Raman spectroscopy analyses. It was found that the concentration of reactive functional groups on the fiber surface was increased after the plasma modification, as well the surface roughness, which finally improved the interfacial adhesion between carbon fibers and epoxy resin. However, high power and long exposure times could partly damage the surface of carbon fibers and decrease the tensile strength of filaments and ILSS of treated fiber composites. |
| |
Keywords: | Plasma treatment carbon fibers adhesive composite materials interfacial properties |
|
|