| 利用通用量具检测曲轴关键几何关系的方法 |
| |
| 引用本文： | 梁海珍,周哲波,周庆宏,张金龙,朱楠楠,张丽珍.利用通用量具检测曲轴关键几何关系的方法[J].煤矿机械,2012,33(4):130-132. |
| |
| 作者姓名： | 梁海珍 周哲波 周庆宏 张金龙 朱楠楠 张丽珍 |
| |
| 作者单位： | 安徽理工大学机械工程学院,安徽淮南,232001 |
| |
| 摘 要： | 基于曲轴的结构特点及技术要求,针对单件生产方式,提出了利用通用量具检测曲轴相位角和曲拐轴颈偏心距的方法,给出了误差分析与计算的基本原理。检测结果表明:采用该检测方法测量的相位角和偏心距均能达到图纸规定的要求,是单件、小批量生产方式下,曲轴试制生产和维修中有效的检测措施。
|
| 关 键 词： | 曲轴 相位角 偏心距 检测 |
Method of Detecting Crankshaft's Key Geometric Relationship by Using General Gage |
| |
| LIANG Hai-zhen
,
ZHOU Zhe-bo
,
ZHOU Qing-hong
,
ZHANG Jin-long
,
ZHU Nan-nan
,
ZHANG Li-zhen.Method of Detecting Crankshaft's Key Geometric Relationship by Using General Gage[J].Coal Mine Machinery,2012,33(4):130-132. |
| |
| Authors: | LIANG Hai-zhen ZHOU Zhe-bo ZHOU Qing-hong ZHANG Jin-long ZHU Nan-nan ZHANG Li-zhen |
| |
| Affiliation: | (College of Mechanical Engineering,Anhui University of Science and Technology,Huainan 232001,China) |
| |
| Abstract: | Based on the structural characteristics and technical requirements of crankshaft,a method using general gage to detect phase-angle and eccentricity of crankshaft under individual production was pointed out,fundamentals for calculation and aberration analysis were also given.Actual test results show that using this detection method can easily reach the requirements specified in the drawings.It was proved to be an effective method in detecting for pilot production and maintenance under job-lot manufacture. |
| |
| Keywords: | crankshaft phase-angle eccentricity detection |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
