The quality of workpiece surface in rough machining of materials with different hardness values by using segmented grinding wheels produced in Vietnam |
| |
Authors: | T P G Nguyen |
| |
Affiliation: | 1.Hanoi University of Science and Technology,Hanoi,Viet Nam |
| |
Abstract: | Segmented grinding wheels have been developed to increase the grinding ability of abrasive grains in discontinuous machining. The cutting ability of the segmented grinding wheels is evaluated. The discontinuity coefficient η of the working surface of a segmented grinding wheel is defined as a ratio of the total length of spacings between the segments to the total circumference of the wheel. Five newly developed segmented grinding wheels with η = 10.91, 16.37, 18.19, 20.01, and 21.83% and one conventional wheel (η = 0%) were used for grinding unhardened and hardened steels as well as aluminum alloy. The results have shown that a smoother workpiece surface was obtained using segmented grinding wheels with η = 18.19% in machining the unhardened steel and with η = 20.01% in machining the aluminum alloy. |
| |
Keywords: | |
本文献已被 SpringerLink 等数据库收录! |
|