| Abstract: | Carrier‐free dyeing of radiation‐grafted polyester fabrics with disperse red dye was studied in the temperature range 283–363 K. 1‐vinyl 2‐pyrrolidone (NVP), acrylic acid (AA) or their mixture was used to graft poly(ethylene terephthalate) (PET) fabric. The effects of pH of the dye solution, graft yield (GY), dyeing time (t), dye concentration (C), and dyeing temperature (T) on the colour difference (CD) of PET fabric were studied. The best dyeing condition was achieved at pH 5.5. CD increases linearly with the increase in GY, with slopes depending on the type of grafted copolymer. CD increased rapidly as the dyeing time increased; this was followed by a relatively slow dyeing rate within a few minutes. The initial dyeing rate (R) was found to increase with an increase in C and T. The dyeing rates for all grafted samples followed 0.35‐order kinetics and are temperature‐independent. Average activation energy 9.26 kJ mol?1 is calculated for the dyeing process and is independent of the fabric treatment. Pre‐exponential rate constants 1976, 1839, and 1579 (CD/GY) s?1 were calculated for dyeing PET samples grafted with AA/NVP mixture, NVP and AA, respectively, while 1074 CD s?1 was evaluated for carrier dyeing of ungrafted fabric. Analysis of the kinetic parameters and the dyeing mechanism revealed that dyeing PET fabric was diffusion‐controlled. Grafting PET fabric improved significantly the dyeing affinity of the DR dye over ungrafted samples dyed in solutions containing a carrier. Copyright © 2005 Society of Chemical Industry |
