| 考虑齿厚误差的齿轮内孔磨夹具定心圆柱直径的计算 |
| |
| 引用本文： | 陈从桂 陈艾华. 考虑齿厚误差的齿轮内孔磨夹具定心圆柱直径的计算[J]. 机械, 2000, 27(1): 20-21 |
| |
| 作者姓名： | 陈从桂 陈艾华 |
| |
| 作者单位： | ：陈从桂(中南工学院 衡阳 421001) |
| |
| 摘 要： | 介绍了在设计齿轮内孔的磨夹具时由于齿厚误差的存在，对滚柱直径及定位滚柱的外公切圆的精确计算的影响。并通过算便进行了验证和比较 。
|
| 关 键 词： | 齿厚误差 节圆 分度圆 节圆夹具 |
Calculation of CenteringCylinder Diameter of Gear Inner Hole Grinding Fixture By Considering the Tooth ThicknessError |
| |
| Abstract. Calculation of CenteringCylinder Diameter of Gear Inner Hole Grinding Fixture By Considering the Tooth ThicknessError[J]. Machinery, 2000, 27(1): 20-21 |
| |
| Authors: | Abstract |
| |
| Abstract: | Effects of the tooth thickness error on the exact calculation of the roller diameter and the Common Circumscribed circle duaneter of locating rollers are introduced in designing grinding fixture, the pith circle fixtire. An example is shown in this paper to verofy the above theory and some Camparisons are made. |
| |
| Keywords: | tooth thickmess error pitch circle reference circle pitch circle fixture |
| 本文献已被 CNKI 维普 等数据库收录！ |
