| Abstract: | Abstract A key problem with dried tomatoes for the industries is that the products tend to have limited shelf-life due to yeast and mold growth. This study was undertaken to evaluate the efficacy of chlorine treatments on minimizing yeast and mold populations on fresh and semi-dried tomatoes. Tomatoes were inoculated with molds (4.2 log CFU/g) from contaminated pack of semi-dried tomatoes. These inoculated tomatoes were then treated by washing with water (control) and concentrations of 50, 100, and 200 ppm of chlorinated water for specific length of time (1, 5, and 10 min), and finally analyzed for yeast and mold populations. In this study, the results showed that the maximum log reduction of yeast and mold cells on tomato surface was found to be chlorinated water with a concentration of 200 ppm. At this concentration, washing for 5 and 10 min resulted in 1.7 log reduction and 3.1 log reduction in yeast and mold growth respectively. This was significant (P<0.01) as compared with washing with tap water (control). Drying at 60°C further reduce the microbial load of these pre-treated tomatoes. Results showed that there were reductions in three of the twelve runs while seven of the runs demonstrated an increase in microbial load. This finding is important as it demonstrated that when using a typical drying temperature of 60°C, if the initial microbial load is high, there is a risk that the dehydrator can act as an incubator for more microbial growth. This finding also demonstrated the importance of pretreatment to reduce the initial microbial load before drying commences. |
