Fenton-like oxidation of Rhodamine B in the presence of two types of iron (II,III) oxide

The catalytic efficiency of iron (II, III) oxide to promote Fenton-like reaction was examined by employing Rhodamine B (RhB) as a model compound at neutral pH. Two types of iron (II, III) oxides were used as heterogeneous catalysts and characterized by XRD, Mössbauer spectroscopy, BET surface area, particle size and chemical analyses. The adsorption to the catalyst changed significantly with the pH value and the sorption isotherm was fitted using the Langmuir model for both solids. Both sorption and FTIR results indicated that surface complexation reaction may take place in the system. The variation of oxidation efficiency against H₂O₂ dosage and amount of exposed surface area per unit volume was evaluated and correlated with the adsorption behavior in the absence of oxidant. The occurrence of optimum amount of H₂O₂ or of exposed surface area for the effective degradation of RhB could be explained by the scavenging effect of hydroxyl radical by H₂O₂ or by iron oxide surface. Sorption and decolourization rate of RhB as well as H₂O₂ decomposition rate were found to be dependent on the surface characteristics of iron oxide. The kinetic oxidation experiments showed that structural Fe^II content strongly affects the reactivity towards H₂O₂ decomposition and therefore RhB decolourization. The site density and sorption ability of RhB on surface may also influence the oxidation performance in iron oxide/H₂O₂ system. The iron (II, III) oxide catalysts exhibited low iron leaching, good structural stability and no loss of performance in second reaction cycle. The sorption on the surface of iron oxide with catalytic oxidation using hydrogen peroxide would be an effective oxidation process for the contaminants.