| 提高连铸热送板坯温度的传热模型研究 |
| |
| 引用本文： | 王宏明,徐明喜,王俊杰,李波.提高连铸热送板坯温度的传热模型研究[J].连铸,2005(5):1-4. |
| |
| 作者姓名： | 王宏明 徐明喜 王俊杰 李波 |
| |
| 作者单位： | 江苏大学材料科学与工程学院;武汉钢铁集团公司;宝钢集团一钢公司 |
| |
| 摘 要： | 依据板坯连铸机工艺条件,利用铸坯凝固过程传热数学模型计算了铸坯凝固过程温度场分布和坯壳生长情况,并探讨连铸工艺因素对铸坯温度和凝固过程的影响,示例性地提出了提高铸坯温度的工艺手段.
|
| 关 键 词： | 板坯连铸机 温度场分布 传热模型 热送 凝固过程 工艺条件 生长情况 模型计算 工艺因素 |
Heat- transfer model research on temperature improvement of continuous cast and hot delivered slab |
| |
| WANG Hongming,XU Mingxi,WANG Junjie,LI Bo.Heat- transfer model research on temperature improvement of continuous cast and hot delivered slab[J].CONTINUOUS CASTING,2005(5):1-4. |
| |
| Authors: | WANG Hongming XU Mingxi WANG Junjie LI Bo |
| |
| Abstract: | Based on the technical conditions of slab caster,the temperature distribution and the shell growth status are calculated through a heat transfer model on slab solidification process. The impact of operating factors of continuous casting process on the slab temperature field and the solidifying process is discussed. The measure for enhancing the slab temperature is put forward as a example. |
| |
| Keywords: | |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
