| 内压圆筒内壁轴向半椭圆形裂纹的三维弹塑性有限元分析及其J积分 |
| |
| 引用本文： | 刘东学,李惠荣,谢志刚. 内压圆筒内壁轴向半椭圆形裂纹的三维弹塑性有限元分析及其J积分[J]. 化工机械, 2000, 27(1): 26-29 |
| |
| 作者姓名： | 刘东学 李惠荣 谢志刚 |
| |
| 作者单位： | 1. 大连理工大学
2. 北京石油化工工程公司 |
| |
| 摘 要： | 使用Qc11和Q6块体单元,对内壁带有轴向半椭圆形裂纹的内压体筒建立了一种三维弹塑性有限元分析的模型,并实现了虚裂纹扩展法(VCE)用于计算这种三维表面裂纹的J积分。对5个这种筒体的数值计算结果说明,这种模型具有节点少、一致性好的优点;同时给出了这些内壁带有轴向半椭圆形裂纹内压筒体的J值随内径和压力变化的情况。
|
| 关 键 词： | 压力容器 表面裂纹 弹塑性有限元法 J积分 虚裂纹扩展法 |
3D elastic-plastic finite element method analysis of the axial semi-elliptical flaws on the intemal wall of an intemal pressure cylinder and its J integral |
| |
| Liu Dongxue,Li Huirong,Xie Zhigang. 3D elastic-plastic finite element method analysis of the axial semi-elliptical flaws on the intemal wall of an intemal pressure cylinder and its J integral[J]. Chemical Engineering & Machinery, 2000, 27(1): 26-29 |
| |
| Authors: | Liu Dongxue Li Huirong Xie Zhigang |
| |
| Affiliation: | Liu Dongxue,Li Huirong(Dalian University of Technology, Dalian, Liaoning,China)Xie Zhigang(Beijing Petrochemical Engineefing Corporation,Beijing,China) |
| |
| Abstract: | A 3D elastic plastic finite element method(FEM)analysis model was established for the internal pressure cylinder with the axial semi elliptical flaws on its internal wall using Q c 11 and Q 6 cubic elements,and the virtual crack extension method was used to compute the J integral of 3D surface flaws.The numerical calculation results of five cylinders show that the model had the advantages of less nodal points,good compatibility,and the condition of J value varying with the internal diameter and the pressure of the cylinder with the axial semi elliptical flaws was given. |
| |
| Keywords: | Pressure Vessel Surface Flaw Elastic-PlasticFEM J Integral Virtual Crack Extension Method |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
