| 模具间隙对AZ31B板料成形性能的影响 |
| |
| 引用本文： | 褚兴荣,高军,廉爱东,林淑霞,李文娟.模具间隙对AZ31B板料成形性能的影响[J].杭州应用工程技术学院学报,2009(3):217-219. |
| |
| 作者姓名： | 褚兴荣 高军 廉爱东 林淑霞 李文娟 |
| |
| 作者单位： | [1]山东大学材料科学与工程学院,济南250061 [2]山东大学威海分校机电工程学院,威海264209 [3]山东大学工程训练中心,济南250061 |
| |
| 摘 要： | 凸凹模间隙是板料成形过程中的一个重要参数,其设计合理与否将直接影响成形产品的质量及模具寿命等,对镁合金板料而言也是如此。通过多次工艺实验,研究了模具单边间隙对AZ31B交叉轧制镁合金板料成形性能的影响,结果表明：针对0.8 mm厚的AZ31B板料,其最佳单边间隙为1.05-1.10t。
|
| 关 键 词： | 镁合金 模具间隙 成形性能 |
Influence of die clearance on deep drawing performance of AZ31B sheet |
| |
| CHU Xing-rong,GAO Jun,LIAN Ai-dong,LIN Shu-xia,LI WEN-juan.Influence of die clearance on deep drawing performance of AZ31B sheet[J].Journal of Hangzhou Institute of Applied Engineering,2009(3):217-219. |
| |
| Authors: | CHU Xing-rong GAO Jun LIAN Ai-dong LIN Shu-xia LI WEN-juan |
| |
| Affiliation: | (a.School of Materials Science and Engineering,Shandong University,Jinan 250061,China;b.School of Mechanical and Electrical Engineering,Shandong University at Weihai,Weihai 264209,China;c.Engineering Training Center,Shandong University,Jinan 250061,China) |
| |
| Abstract: | Die clearance is one of the most important parameters during sheet metal forming,which will influence the product quality and die life.The effect of die clearance on deep drawing performance of AZ31B sheet is studied through the experiments,and the results show that the best die clearance is between 1.05t and 1.10t. |
| |
| Keywords: | magnalium die clearance formability |
| 本文献已被 维普 等数据库收录！ |
|
