| 带侧抽芯机构模具型腔的设计 |
| |
| 引用本文： | 郭晓梅,丁明明.带侧抽芯机构模具型腔的设计[J].杭州应用工程技术学院学报,2009(3):278-280. |
| |
| 作者姓名： | 郭晓梅 丁明明 |
| |
| 作者单位： | 浙江水利水电专科学校机械电子工程系,杭州310018 |
| |
| 基金项目： | 浙江省教育厅科研计划项目（20060011）; 浙江水利水电专科学校科研基金资助项目（xk2008-11） |
| |
| 摘 要： | 针对具有侧抽芯机构的注塑模型腔的设计,提出了采用Pro/E软件进行设计的办法,使侧抽芯机构的设计由复杂变得简单。在分型面的设计中,提出了用分模体积块法来进行分模的技术方法,同时通过一个扣盖的实例详细介绍了多个分型面的设计过程,从而说明采用Pro/E软件进行设计,不但提高了设计效率,同时也节省了成本,并为其他类似产品的模具设计提供了参考。
|
| 关 键 词： | 分型面 体积块 模具设计 侧抽芯 |
Design of mould with core-pulling mechanisms |
| |
| GUO Xiao-mei,DING Ming-ming.Design of mould with core-pulling mechanisms[J].Journal of Hangzhou Institute of Applied Engineering,2009(3):278-280. |
| |
| Authors: | GUO Xiao-mei DING Ming-ming |
| |
| Affiliation: | (Mechanical and Electronic Engineering Department,Zhejiang Water Conservancy and Hydropower College,Hangzhou 310018,China) |
| |
| Abstract: | The method of adopting the Pro/E software to design injecting mold with core-pulling mechanisms is used,which make the design much easier.And the split problem is resolved by adopting the method of parting mould volume.A volute example with complicated parting surfaces is illustrated.Adopting Pro/E software to design can improve the design effect and reserve cost.This can also make reference to other similar mould designs. |
| |
| Keywords: | parting surface volume method mould design core-pulling mechanisms |
| 本文献已被 维普 等数据库收录！ |
