| 色拉油瓶盖注射模设计 |
| |
| 引用本文： | 张宏建. 色拉油瓶盖注射模设计[J]. 模具工业, 2000, 0(10): 41-42 |
| |
| 作者姓名： | 张宏建 |
| |
| 作者单位： | 兰州照相机厂,甘肃兰州,730020 |
| |
| 摘 要： | 分析了瓶盖塑件的结构特点 ,即有4处需强制脱模 ,故在设计模具时采用了与传统结构不同的五板四开式结构 ,并介绍了模具的工作过程。
|
| 关 键 词： | 色拉油瓶盖 注射模 强制脱模 顺序脱模 |
| 修稿时间： | 2000-03-27 |
Design of the Injection Mould for the Lids of Salad Oil Bottles |
| |
| Zhang Hongjian. Design of the Injection Mould for the Lids of Salad Oil Bottles[J]. Die & Mould Industry, 2000, 0(10): 41-42 |
| |
| Authors: | Zhang Hongjian |
| |
| Affiliation: | Zhang Hongjian |
| |
| Abstract: | The structure characteristics of the plastic parts of the bottle lids were analyzed. Four positions need forced demoulding. For this, the mould design adopted a 5_plate and 4_open structure that differed from the traditional structure. The working process of the mould was introduced. |
| |
| Keywords: | salad oil bottle lid injection mould forced demoulding ordinal demoulding |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
