首页 | 本学科首页   官方微博 | 高级检索  
     

烧结Nd—Fe—B永磁体化学镀Ni—Cu—P性能研究
引用本文:于升学,宋伟明,邵光杰. 烧结Nd—Fe—B永磁体化学镀Ni—Cu—P性能研究[J]. 热加工工艺, 2001, 0(4): 41-42
作者姓名:于升学  宋伟明  邵光杰
作者单位:1. 燕山大学材料与化工学院
2. 齐齐哈尔大学化工系
摘    要:通过适当的预处理工艺,在烧结Nd-Fe-B永磁体表面直接实用化学镀Ni-Cu-P,不需要预镀处理,用X-射线衍射仪,扫描电镜分析与镀层的结构和表面形貌、测试了镀层的耐蚀性能和结合强度。结果表明,Nd-Fe-B永磁体经化学镀Ni-Cu-P后,可以获得与基体结合良好,孔隙率低、耐蚀性高的镀层。

关 键 词:永磁体 Ni-Cu-P合金 化学镀 耐蚀性 永磁材料 烧结磁体
文章编号:1001-3814(2001)04-0041-02

Properties of Electroless Ni-Cu-P Plating Coating on Nd-Fe-B Permanent Magnets
YU Sheng xue ,SONG Wei ming ,SHAO Guang jie. Properties of Electroless Ni-Cu-P Plating Coating on Nd-Fe-B Permanent Magnets[J]. Hot Working Technology, 2001, 0(4): 41-42
Authors:YU Sheng xue   SONG Wei ming   SHAO Guang jie
Affiliation:YU Sheng xue 1,SONG Wei ming 2,SHAO Guang jie 1
Abstract:Ni Cu P alloy coating could directly been deposited on the surface of Nd Fe B perpetual magnets,need not pre deposited Ni P coating on it,only through proper pre treatment its surface.XRD and SEM were used to analyses the microstructure and morphology of the coating respectively.The corrosion resistance and adhesion of Ni Cu P coating was determined by wet hot test and regular adhesiontest method respectively.The experiment results showed elecroless Ni Cu P coating plating on the surface of Nd Fe B permanent magnets has good corrosion resistance,strong adhesion performances and low prosity.
Keywords:Nd Fe B permanent magnet  Ni Cu P alloy  electroless plating  corrosion resistance
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号