首页 | 本学科首页   官方微博 | 高级检索  
     

吸附伏安法测定高纯铝中痕量钛
引用本文:高桂兰,严规有. 吸附伏安法测定高纯铝中痕量钛[J]. 上海第二工业大学学报, 2009, 26(2): 105-109
作者姓名:高桂兰  严规有
作者单位:1. 上海第二工业大学城市建设与环境工程学院,上海,201209
2. 中南大学化学化工学院,长沙,410083
摘    要:利用钛(Ⅳ)与钽试剂(BPHA)形成络合物,于玻璃碳电极(GCE)吸附伏安法测定钛。研究了测定条件和共存离子对测定的干扰,钛浓度在0.06至2ng.ml^-1(-0.3V下富集2min)范围内与电流呈良好的线性关系,检出限可达0.0076ng.ml^-1;方法选择性好,灵敏度高,操作简单;应用于高纯铝中痕量钛的测定,结果令人满意。

关 键 词:  钽试剂  吸附伏安法  玻璃碳电极

Determination of Trace Titanium in High Purity Aluminum by Adsorption Voltammetry
GAO Gui-lan,YAN Gui-you. Determination of Trace Titanium in High Purity Aluminum by Adsorption Voltammetry[J]. Journal of Shanghai Second Polytechnic University, 2009, 26(2): 105-109
Authors:GAO Gui-lan  YAN Gui-you
Affiliation:1. School of Urban Development and Environmental Engineering;Shanghai Second Polytechnic University;Shanghai 201209;P.R.China;2. Department of Chemistry and Chemical Engneering;Central South University;Changsha 410083;P.R.China
Abstract:Titanium (Ⅳ) reacts with N-benzoyl-N-phenylhydroxylamine (BPHA) to form a complex, which can be used to determine Titanium by adsorption voltammetry at a glassy carbon electrode(GCE). The experimental conditions and the influence of foreign ions on the determination were investigated. The current-concentration curve was linear in the range of 0.06 to 2 ng.ml-1 Ti at a deposition time of 2 min at -0.3V. The detection limit was 0.0076 ng.ml-1. The method has been proved to be of high sensitivity and to be easy to operate. The procedure has been applied to the determination of trace Titanium (Ⅳ) in high purity aluminum and the samples results were satisfactory.
Keywords:Titanium  BPHA  adsorption voltammetry  glassy carbon electrode
本文献已被 CNKI 维普 万方数据 等数据库收录!
点击此处可从《上海第二工业大学学报》浏览原始摘要信息
点击此处可从《上海第二工业大学学报》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号