| 支架冲压工艺与模具设计 |
| |
| 引用本文： | 赵跃文. 支架冲压工艺与模具设计[J]. 模具工业, 2010, 36(11): 37-40 |
| |
| 作者姓名： | 赵跃文 |
| |
| 作者单位： | 太原工业学院,山西,太原,030008 |
| |
| 摘 要： | 分析了炊具用支架的冲压工艺,介绍了支架冲压模具的主要结构及工作过程,解决了冲裁支架窄槽的难题。实践证明:模具结构合理,生产的支架满足要求。
|
| 关 键 词： | 支架 冲压工艺 模具结构 |
Stamping process and design of die for cooker bracket |
| |
| ZHAO Yue-wen. Stamping process and design of die for cooker bracket[J]. Die & Mould Industry, 2010, 36(11): 37-40 |
| |
| Authors: | ZHAO Yue-wen |
| |
| Affiliation: | ZHAO Yue-wen(Taiyuan Institute of Technology,Taiyuan,Shanxi 030008,China) |
| |
| Abstract: | The stamping process of a cooker bracket was analyzed;and the main structure and working process of a stamping die for the forming were described.The die can implement the blanking of narrow groove in the bracket. |
| |
| Keywords: | bracket stamping process die structure |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
