| 18Cr2Ni4WA渗碳淬火齿轮弯曲疲劳特性试验研究 |
| |
| 引用本文： | 王国军,闫清东,项昌乐,陈欣,蒋美华. 18Cr2Ni4WA渗碳淬火齿轮弯曲疲劳特性试验研究[J]. 机械传动, 2006, 30(5): 56-57 |
| |
| 作者姓名： | 王国军 闫清东 项昌乐 陈欣 蒋美华 |
| |
| 作者单位： | 1. 北京理工大学车辆传动重点实验室,北京,100081
2. 军事交通学院,天津,300161 |
| |
| 摘 要： | 论述了18Cr2Ni4WA渗碳淬火齿轮弯曲疲劳特性的试验研究情况。试验采用3级恒定应力水平的成组法，拟合出的R—S—N曲线，获得了不同可靠度下的弯曲疲劳特性，为该材料齿轮的弯曲疲劳可靠性设计、有限寿命设计提供了真实可靠的基础数据。
|
| 关 键 词： | 齿轮 R-S-N曲线 疲劳 可靠度 |
| 文章编号： | 1004-2539(2006)05-0056-02 |
| 收稿时间： | 2005-09-15 |
| 修稿时间： | 2005-10-25 |
Test Study of Bending Fatigue Property for 18Cr2Ni4WA Gear with Carburization-Quench Hardening |
| |
| Wang Guojun,Yan Qingdong,Xiang Changle,Chen Xin,Jiang Meihua. Test Study of Bending Fatigue Property for 18Cr2Ni4WA Gear with Carburization-Quench Hardening[J]. Journal of Mechanical Transmission, 2006, 30(5): 56-57 |
| |
| Authors: | Wang Guojun Yan Qingdong Xiang Changle Chen Xin Jiang Meihua |
| |
| Abstract: | The experimental investigation of gear-tooth bending fatigue property for 18Cr2Ni4WA steel Gear with Carburization-Quench Hardening was reported. The grouping test method at three constant stress levels was applied for short life-span areas. The tested data were the processed with statistic method. The exact R-S-N curves were thus fitted as a result, the values of limit of bending fatigue under various reliabilities were gained. |
| |
| Keywords: | Gear R-S-N curve Fatigue Reliability |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
