首页 | 本学科首页   官方微博 | 高级检索  
     

Ti和Nb微合金化对超纯11%Cr铁素体不锈钢组织的影响
引用本文:刘静,罗兴宏,胡小强,刘实.Ti和Nb微合金化对超纯11%Cr铁素体不锈钢组织的影响[J].金属学报,2011(6):688-696.
作者姓名:刘静  罗兴宏  胡小强  刘实
作者单位:中国科学院金属研究所;
基金项目:国家自然科学基金资助项目50734002~~
摘    要:结合实验研究和热力学计算对不同间隙元素含量下Ti和Nb微合金化对超纯11%Cr铁素体不锈钢铸态、轧态和焊接热影响区(HAZ)的影响进行了研究和分析.研究结果表明:钢中间隙元素含量在0.0163%时Ti和Nb微合金化效果较好,在相同的轧制工艺下可获得更好的轧态组织,相同焊接工艺条件下HAZ晶粒尺寸也较细小.分析表明:在相...

关 键 词:超纯铁素体不锈钢  微合金化  铸态组织  等轴化  间隙元素  Ti和Nb稳定化

EFFECT OF Ti AND Nb MICRO-ALLOYING ON THE MICROSTRUCTURE OF THE ULTRA-PURIFIED 11%Cr FERRITE STAINLESS STEELS
LIU Jing,LUO Xinghong,HU Xiaoqiang,LIU Shi Institute of Metal Research,Chinese Academy of Sciences,Shenyang.EFFECT OF Ti AND Nb MICRO-ALLOYING ON THE MICROSTRUCTURE OF THE ULTRA-PURIFIED 11%Cr FERRITE STAINLESS STEELS[J].Acta Metallurgica Sinica,2011(6):688-696.
Authors:LIU Jing  LUO Xinghong  HU Xiaoqiang  LIU Shi Institute of Metal Research  Chinese Academy of Sciences  Shenyang
Affiliation:LIU Jing,LUO Xinghong,HU Xiaoqiang,LIU Shi Institute of Metal Research,Chinese Academy of Sciences,Shenyang 110016
Abstract:Ultra-purified ferrite stainless steels(UP-FSS)are widely used in the fields of automobile, household appliances etc.Much better performance than conventional ferrite stainless steels is obtained by minimizing the interstitial elements level in UP-FSS.However,some negative effects,such as degradation of the formability and ridging-resistance,are also brought by purifying the steels,which lead to abnormally growth of the columnar grains.Moreover,the grains in heat affected zone(HAZ) are apt to coarsen during...
Keywords:ultra-purified ferrite stainless steel  micro-alloying  as-cast structure  equiaxed  interstitial element  Ti and Nb stabilization  
本文献已被 CNKI 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号