| 变速器齿轮参数优化与啸叫声控制的研究 |
| |
| 引用本文： | 施全,龙月泉,石晓辉,郭栋.变速器齿轮参数优化与啸叫声控制的研究[J].噪声与振动控制,2010,30(3):46-49. |
| |
| 作者姓名： | 施全 龙月泉 石晓辉 郭栋 |
| |
| 作者单位： | （重庆理工大学汽车零部件制造及检测技术教育部重点实验室，重庆400050） |
| |
| 摘 要： | 从降低变速器啸叫声的角度出发,通过振动噪声台架试验识别出主要噪声源,分析了齿轮系统的动态激励,确定了产生啸叫声的主要激励源是齿轮副的啮合冲击;分别通过减小侧隙、增大重合度对齿轮副进行低噪声结构优化,对降低变速器由于齿轮产生的啸叫声有较好的作用。
|
| 关 键 词： | 声学 变速器 振动 啸叫 微观修形 |
| 收稿时间： | 2009-6-29 |
Parameter Optimization of Transmission Gear Clusters and Squeak Noise Control |
| |
| SHI Quan,LONG Yue-quan,SHI Xiao-hui,GUO Dong.Parameter Optimization of Transmission Gear Clusters and Squeak Noise Control[J].Noise and Vibration Control,2010,30(3):46-49. |
| |
| Authors: | SHI Quan LONG Yue-quan SHI Xiao-hui GUO Dong |
| |
| Affiliation: | (Key Laboratory of Automotive Parts Manufacturing and Detecting Technology of Ministry of Education，Chongqing University of Technology, Chongqing 400050，China) |
| |
| Abstract: | In order to reduce the transmission＇s squeak,the main noise source of the transmission is recognized by the NVH testing.By analyzing the dynamic actuation of gear clusters,it is confirmed that the mesh impact among gears is the main actuation source of the squeak.Then,by reducing backlash and increasing contact radio,the optimization of the gear clusters is carried out.This method is proved useful in reducing the transmission＇s squeak induced by the gear meshing. |
| |
| Keywords: | acoustics transmission vibration squeak micro-geometry |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
| 点击此处可从《噪声与振动控制》浏览原始摘要信息 |
|
点击此处可从《噪声与振动控制》下载全文 |
