Topological Design and Modulation Strategy for Buck–Boost Three-Level Inverters

To date, designed topologies for dc–ac inversion with both voltage buck and boost capabilities are mainly focused on two-level circuitries with extensions to three-level possibilities left nearly unexplored. Contributing to this area of research, this paper presents the design of a number of viable buck–boost three-level inverters that can also support bidirectional power conversion. The proposed front-end circuitry is developed from the ?uk-derived buck–boost two-level inverter, and by using the “alternative phase opposition disposition” modulation scheme, the buck–boost three-level inverters can perform distinct five-level line voltage and three-level phase voltage switching by simply controlling the active switches located in the designed voltage boost section of the circuits. As a cost saving option, one active switch can further be removed from the voltage boost section of the circuits by simply rerouting the gating commands of the remaining switches without influencing the ac output voltage amplitude. To verify the validity of the proposed inverters, MATLAB/PLECS simulations were performed before a laboratory prototype was implemented for experimental testing.