首页 | 本学科首页   官方微博 | 高级检索  
     

高温氧气条件下CrNiMo钢的摩擦磨损特性研究
引用本文:崔晶,陈跃,刘敬超,杜三明,邱明,张永振.高温氧气条件下CrNiMo钢的摩擦磨损特性研究[J].润滑与密封,2009,34(2).
作者姓名:崔晶  陈跃  刘敬超  杜三明  邱明  张永振
作者单位:河南科技大学材料科学与工程学院,河南洛阳,471003
基金项目:国家自然科学基金,国家重点基础研究发展规划(973计划) 
摘    要:以CrNiMo钢和H96黄铜组成配副,利用QG-700型高温气氛摩擦磨损试验机,研究了高温氧气气氛环境中滑动速度、接触压力等对CrNiMo钢摩擦学特性的影响.采用扫描电子显微镜(SEM)和能谱仪(EDS)对磨损表面进行表征.结果表明:在高温氧气气氛中,随着滑动速度和接触压力的增大,摩擦因数逐渐减小,磨损率逐渐增大.在滑动速度和接触压力逐渐增大的过程中,CrNiMo钢的主要磨损机制由粘着磨损转变为氧化磨损.

关 键 词:摩擦副  摩擦磨损  高温  氧气气氛

Study on Tribological Properties of Steel-copper Couples in High Temperature and Oxygen Atmosphere
Cui Jing,Chen Yue,Liu Jingchao,Du Sanming,Qiu Ming,Zhang Yongzhen.Study on Tribological Properties of Steel-copper Couples in High Temperature and Oxygen Atmosphere[J].Lubrication Engineering,2009,34(2).
Authors:Cui Jing  Chen Yue  Liu Jingchao  Du Sanming  Qiu Ming  Zhang Yongzhen
Affiliation:Institute of Material Science and Engineering;Henan University of Science and Technology;Luoyang Henan 471003;China
Abstract:By using QG-700 pin-on-disk friction and wear tester,effects of different sliding speed and contacting pressure on the tribology properties of CrNiMo steel under high temperature and oxygen atmosphere were investigated.The morphologies of worn surface of pin specimen were studied by using SEM and EDS.The results indicate that under the environment of high temperature and oxygen atmosphere,the friction coefficient decreases and the wear rate increases as the sliding speed and contacting pressure increase.Whe...
Keywords:couples  friction and wear  high temperature  oxygen atmosphere  
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号