| 基于修正Archard模型的聚醚醚酮磨损数值模拟 |
| |
| 引用本文： | 肖博升,王新宇,李征,谷俊峰,阮诗伦,申长雨. 基于修正Archard模型的聚醚醚酮磨损数值模拟[J]. 工程塑料应用, 2017, 45(9). DOI: 10.3969/j.issn.1001-3539.2017.09.019 |
| |
| 作者姓名： | 肖博升 王新宇 李征 谷俊峰 阮诗伦 申长雨 |
| |
| 作者单位： | 1. 大连理工大学工程力学系,大连,116024;2. 大连理工大学工程力学系,大连 116024;工业装备结构分析国家重点实验室,大连 116024 |
| |
| 基金项目： | 国家自然科学基金重点项目，863计划项目，中央高校基本科研业务项目，辽宁省教育厅重点实验室基础研究项目，111引智计划项目 |
| |
| 摘 要： | 基于端面摩擦磨损实验,研究了摩擦条件对聚醚醚酮(PEEK)磨损率的影响,并以此建立了PEEK的修正Archard磨损计算模型。结合有限元分析软件与网格自适应处理技术,该磨损计算模型被用于实现PEEK在多种摩擦工况下的仿真与预测模拟,模拟结果与试验结果吻合良好,说明提出的磨损模型与数值模拟方法的合理性,适用于PEEK在复杂接触条件下的磨损预测。
|
| 关 键 词： | 聚醚醚酮 摩擦磨损 Archard模型 数值模拟 |
Numerical Simulation of PEEK Wear Based on Modiifed Archard Model |
| |
| Xiao Bosheng,Wang Xinyu,Li Zheng,Gu Junfeng,Ruan Shilun,Shen Changyu. Numerical Simulation of PEEK Wear Based on Modiifed Archard Model[J]. Engineering Plastics Application, 2017, 45(9). DOI: 10.3969/j.issn.1001-3539.2017.09.019 |
| |
| Authors: | Xiao Bosheng Wang Xinyu Li Zheng Gu Junfeng Ruan Shilun Shen Changyu |
| |
| Abstract: | Based on the end face friction and wear experiments,the influence of friction conditions on the wear coefficient of polyether ether ketone (PEEK) was studied,and a modified Archard wear calculation model for PEEK was established. Combined withfinite element analysis software and adaptive grid technology,the wear calculation model was used in the wear simulation and prediction of PEEK under various frictional conditions,and the simulation results are in good agreement with the experimental results,indicating the rationality of the wear model and numerical simulation method proposed. This method is suitable for wear prediction of PEEK under complex contact conditions. |
| |
| Keywords: | polyether ether ketone friction and wear Archard model numerical simulation |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
