| 基于UG NX的汽车音响面板注塑模设计 |
| |
| 引用本文： | 黄继战,范玉,仇文宁,王凤清. 基于UG NX的汽车音响面板注塑模设计[J]. 工程塑料应用, 2017, 45(9). DOI: 10.3969/j.issn.1001-3539.2017.09.017 |
| |
| 作者姓名： | 黄继战 范玉 仇文宁 王凤清 |
| |
| 作者单位： | 1. 江苏建筑职业技术学院,江苏徐州 221008;徐州市模具新技术工程技术研究中心,江苏徐州 221008;2. 江苏建筑职业技术学院,江苏徐州,221008 |
| |
| 基金项目： | 江苏省高校"青蓝工程"科技创新团队项目，徐州市科技计划项目，江苏建筑职业技术学院科技项目 |
| |
| 摘 要： | 在汽车音响面板工艺分析的基础上,采用UG NX 10.0软件设计了一种汽车音响面板单型腔注塑模具。该模具采用了两板式结构、镶拼式型芯结构、两点进料方式、推切式潜顶针浇口、三面斜导柱抽芯以及顶针、推管和推块组成的复合顶出机构。实践证明,该模具结构合理,保证了制品质量,简化了模具结构,方便了模具成型零件加工,对类似面板的注塑模设计具有一定的借鉴意义。
|
| 关 键 词： | UG 塑料面板 单腔注塑模 浇口 抽芯 |
Design of Injection Mould for Car Audio Panel Based on UG NX |
| |
| Huang Jizhan,Fan Yu,Qiu Wenning,Wang Fengqing. Design of Injection Mould for Car Audio Panel Based on UG NX[J]. Engineering Plastics Application, 2017, 45(9). DOI: 10.3969/j.issn.1001-3539.2017.09.017 |
| |
| Authors: | Huang Jizhan Fan Yu Qiu Wenning Wang Fengqing |
| |
| Abstract: | On the basis of process analysis of car audio panel,a single cavity injection mold for car audio panel was designed with UG NX 10.0 software. The design of the mould adopted two plate structure,inlaying core structure,two feeding mode, submarine gate,three sides slanting guide column core pulling,and the composite ejector mechanism composed of push rod, pushing pipe and pushing block. The practice proves that the die structure is reasonable,the quality of the product is guaranteed,the die structure is simplified,and the processing ofthe molding parts of the die is convenient. It has certain reference significance for the design of the injection mold of the similar panel. |
| |
| Keywords: | UG plastic panel single cavity injection mold gate core pulling |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
