| 改性对高钛渣物相组成的影响研究 |
| |
| 引用本文： | 徐福昌,廖亚龙,雷鹰,段昕辉,李长龙,王欣,刘建华. 改性对高钛渣物相组成的影响研究[J]. 钛工业进展, 2011, 28(1): 21-24 |
| |
| 作者姓名： | 徐福昌 廖亚龙 雷鹰 段昕辉 李长龙 王欣 刘建华 |
| |
| 作者单位： | 昆明理工大学冶金与能源工程学院,云南,昆明,650093 |
| |
| 基金项目： | 昆明理工大学人才培养基金(2008-10) |
| |
| 摘 要： | 以CaO，NaNO3为添加剂，研究了添加剂配比和焙烧温度对高钛渣物相组成的影响。焙烧实验结果说明，改性焙烧使高钛渣中的TiO2转变为钛酸钙，且焙烧温度越高，CaO添加剂配比越大，相转变越完全。高钛渣改性的适宜条件：高钛渣与CaO，NaNO3的配比为10：8：3；焙烧温度为1200～1300℃；焙烧时间为120min。对改性后的高钛渣进行了初步的酸解浸出实验，在焙烧温度1200℃、焙烧时间120min、高钛渣与CaO，NaNO3的配比为10：8：3时，浸出率可达到96．23％。
|
| 关 键 词： | 高钛渣 添加剂 焙烧温度 改性 浸出率 |
Influence of Modification on Phase Composition of Titanium Slag |
| |
| Xu Fuchang,Liao Yalong,Lei Ying,Duan Xinhui,Li Changlong,Wang Xin,Liu Jianhua. Influence of Modification on Phase Composition of Titanium Slag[J]. , 2011, 28(1): 21-24 |
| |
| Authors: | Xu Fuchang Liao Yalong Lei Ying Duan Xinhui Li Changlong Wang Xin Liu Jianhua |
| |
| Affiliation: | Xu Fuchang,Liao Yalong,Lei Ying,Duan Xinhui,Li Changlong,Wang Xin,Liu Jianhua(Faculty of Metallurgical and Energy Engineering,Kunming University of Science and Technology,Kunming 650093,China) |
| |
| Abstract: | CaO and NaNO3 were used as chemical additives in the research,and influences of the chemical additive proportion and roasting temperature on the phase composition of high titanium slag have been studied.The experimental results showed that the modified roasting made the TiO2 contained in the high titanium slag and other impurities gradually transform into titanate calcium,and the transformation was complete with higher temperature and chemical additive proportion.The suitable modified condition: proportion ... |
| |
| Keywords: | high titanium slag additives roasting temperature modification leaching rate |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
