| 在酸性条件下采用高能球磨法制备 Cu2O纳米粉末 |
| |
| 引用本文： | 陈鼎,倪颂,陈振华,陈更莉,陈刚.在酸性条件下采用高能球磨法制备 Cu2O纳米粉末[J].无机材料学报,2007,22(6):1251-1254. |
| |
| 作者姓名： | 陈鼎 倪颂 陈振华 陈更莉 陈刚 |
| |
| 作者单位： | 湖南大学,材料科学与工程学院,长沙,410082 |
| |
| 基金项目： | 国家自然科学基金;高等学校博士学科点专项科研项目 |
| |
| 摘 要： | 采用行星球磨机在pH=2的稀盐酸溶液中对Cu粉进行球磨，球磨机简体和磨球材质均为纯Cu，球料比为20：1，球磨机转速为300r／min，通过X射线衍射（XRD）、扫描电子显微镜（SEM）、透射电子显微镜（TEM）等对球磨产物进行了表征．XRD结果表明，球磨3h后，所加入的纯Cu粉末基本转化为Cu20粉末．球磨70h后得到纯的Cu20粉末，粉末粒度为50-100nm．并对Cu20纳米粉末的生成机制及球磨工艺参数对Cu20形成的影响进行了讨论．
|
| 关 键 词： | 机械力化学 纳米Cu2O 高能球磨 |
| 文章编号： | 1000-324X（2007）06-1251-04 |
| 收稿时间： | 2006-12-18 |
| 修稿时间： | 2006-12-18 |
Preparing Cu2O Nanoparticles in Acid Solution Using High-energy Ball Milling |
| |
| CHEN Ding,NI Song,CHEN Zhen-Hua,CHEN Geng-Li,CHEN Gang.Preparing Cu2O Nanoparticles in Acid Solution Using High-energy Ball Milling[J].Journal of Inorganic Materials,2007,22(6):1251-1254. |
| |
| Authors: | CHEN Ding NI Song CHEN Zhen-Hua CHEN Geng-Li CHEN Gang |
| |
| Affiliation: | School of Material Science and Engineering, Hunan University, Changsha 410082, China |
| |
| Abstract: | The copper powder was ball-milled in HCl solution (pH=2) by high-energy ball milling. Both milling balls and container were made of pure copper. The weight ratio of Cu balls with in diameter of 15mm to the weight of powder was 20:1, and all milling was carried out at a speed of 300r/min. The pure copper powder was transformed to Cu2O fundmentally after 3h ball milling while the pure Cu2O with the diameter of 50--100nm was obtained after 70h ball milling. The as-synthesized products were characterized by X-ray diffraction (XRD), scanning electron microscope (SEM) and transmission electron microscope (TEM). The mechanism of the formation of Cu2O and the effect of milling parameters on the formation of Cu2O were discussed. |
| |
| Keywords: | mechanochemistry Cu2O nanoparticle high-energy ball milling |
| 本文献已被 维普 万方数据 等数据库收录！ |
| 点击此处可从《无机材料学报》浏览原始摘要信息 |
|
点击此处可从《无机材料学报》下载全文 |
|
