Development of RF magnetron sputtering method to fabricate PZT thin film actuator |
| |
Authors: | Kazuyoshi Tsuchiya Toshiaki Kitagawa Eiji Nakamachi |
| |
Affiliation: | Osaka Institute of Technology, Bio Venture Center, 5-16-1 Oohiya Asahi-Ku, Osaka 535-8585, Japan |
| |
Abstract: | PZT piezoelectric very thin films suitable for a microactuator have been deposited onto Invar alloy substrate using a high-temperature RF magnetron sputtering technique. PZT thin films must be deposited onto conductive substrate for a monomorph or a bimorph actuator. The chemical composition and the crystalline structure of these films were measured by ESCA and XRD, respectively. The chemical composition of PZT deposited stoichiometrically was almost the same as commercially-produced bulk PZT. Crystal planes (1 1 0) and (1 1 1) of PZT perovskite structure were observed in XRD analysis. When the substrate was heated to above 600 °C, SEM revealed only a very small number of pinholes on the surface. A thin (500 nm) film actuator has been characterized by measuring the piezoelectric property using a Laser Doppler Vibrograph. It was confirmed that the piezoelectric property has a linear relationship with the grain size, which also increased with the substrate temperature. The piezoelectric property of deposited PZT thin films showed a good agreement with a quoted value of bulk PZT, when the substrates were heated to 600 °C. |
| |
Keywords: | PZT RF magnetron sputtering Piezoelectric property Grain size Substrate temperature |
本文献已被 ScienceDirect 等数据库收录! |