首页 | 本学科首页   官方微博 | 高级检索  
     


Model test of the overburden deformation and failure law in close distance multi-seam mining
Authors:Wei-feng Yang  Wang-hua Sui  Xiao-hong Xia
Affiliation:School of Resources and Geoscience, China University of Mining and Technology, Xuzhou 221016, China
Abstract:Based on characteristic of the associated mining of multi-coal seam and the engineering geological characteristics of overburden, the mining impact pattern of multiseam mining and the dynamic fracture mechanism of overburden were characterized by applying the engineering geological mechanical model test. The related strata movement parameters and influence area of multi-seam mining were obtained. the strike boundary angle is 61°, the full extraction coefficient is 0.93, the greatest subsidence angle is 81°, the horizontal movement factor is 0.38, the deviation of inflection point /mining deep is 0.11. The development height of caving zone and water flowing fractured zone of multi-seam mining were calculated, is 32 m and 81.5 m separatly. The assess of influence degree of coal layer safety mining is that, there exists the possibility of water and sand inflow when mining, some messures for mine water prevention and control should be used, and the mining thickness should be local strictly limit. Supported by the National Natural Science Foundation of China(40372123)
Keywords:multi-seam mining  overburden failure  safety mining  engineering geological mechanical model
本文献已被 维普 SpringerLink 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号