| 铁道货车用高分子斜楔材料的摩擦磨损性能研究 |
| |
| 引用本文： | 韩建民,李卫京,崔世海,王金华,胡海滨,杨爱国. 铁道货车用高分子斜楔材料的摩擦磨损性能研究[J]. 材料工程, 2006, 0(2): 12-14,19 |
| |
| 作者姓名： | 韩建民 李卫京 崔世海 王金华 胡海滨 杨爱国 |
| |
| 作者单位： | 北京交通大学,机械与电子控制工程学院,北京,100044;齐齐哈尔铁路车辆(集团)有限责任公司,黑龙江,齐齐哈尔,161002 |
| |
| 摘 要： | 对交叉支撑转向架摩擦减振装置所用的三种高分子材料斜楔的摩擦磨损性能及磨损机理进行了研究.结果表明:三种高分子材料斜楔与T10磨耗板配对时的摩擦系数基本没有差异,都明显低于传统的ADI斜楔与45钢组成的配对副;从磨损量角度来讲,三种高分子材料组成的斜楔与T10磨耗板配对时的体积磨损量远远低于45钢与ADI配对副的体积磨损量.
|
| 关 键 词： | 转向架 斜楔 高分子材料 摩擦磨损 |
| 文章编号： | 1001-4381（2006）02-0012-03 |
| 收稿时间： | 2005-01-10 |
| 修稿时间： | 2005-01-102005-06-15 |
Friction and Wear Study of High Polymer Materials for Slanting Wedge Applied on Railway Wagon |
| |
| HAN Jian-min,LI Wei-jing,CUI Shi-hai,WANG Jin-hua,HU Hai-bin,YANG Ai-guo. Friction and Wear Study of High Polymer Materials for Slanting Wedge Applied on Railway Wagon[J]. Journal of Materials Engineering, 2006, 0(2): 12-14,19 |
| |
| Authors: | HAN Jian-min LI Wei-jing CUI Shi-hai WANG Jin-hua HU Hai-bin YANG Ai-guo |
| |
| Affiliation: | 1. School of Mechanical, Electronic and Control Engineering, Beijing Jiaotong University, Beijing 100044, China; 2. CNR. Qiqihar Railway Roiling Stock (Group |
| |
| Abstract: | The friction and wear properties and mechanism of three kinds of high polymer slanting wedge materials for frictional damping system of cross-braced bogies were studied. The results showed that the friction coefficients of three kinds of high polymer materials against T10 steel were almost same, and obviously lower than that of couples consisting of ADI against 45 steel. Moreover, the wear volume loss of three kinds of high polymer materials against T10 was obviously lower than that of ADI against 45 steel. |
| |
| Keywords: | bogie slanting wedges high polymer material friction and wear |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
