| 提高114CPE机组热轧无缝钢管成材率的工艺实践 |
| |
| 引用本文： | 卓钊,杭乃勤,程向龙,段家田,康志勇.提高114CPE机组热轧无缝钢管成材率的工艺实践[J].特殊钢,2009,30(6):29-31. |
| |
| 作者姓名： | 卓钊 杭乃勤 程向龙 段家田 康志勇 |
| |
| 作者单位： | 1武汉科技大学材料与冶金学院，武汉430081;2武钢汉阳轧钢厂，武汉430035 |
| |
| 摘 要： | 针对Φ114mm CPE(斜轧穿孔延伸)机组生产石油用管成材率低的问题,对生产工艺流程进行了分析。得出中间热锯切和热切头尾是导致成材率低的两个重要原因。通过采用改进的钢管下冷床对齐方法以及缩口工艺,使Φ73.0 mm×5.5 mm和Φ88.9 mm×6.5 mm的石油用管综合成材率由78%提高至84.5%～85.0%。
|
| 关 键 词： | CPE机组 顶管机 芯棒 缩口工艺 成材率 |
| 收稿时间： | 2009-05-18 |
Practice of Process for Improving Yield of Seamless Pipe Hot-Rolled by 114CPE Mill |
| |
| Zhuo Zhao,Hang Naiqing,Cheng Xianglong,Duan Jiatian,Kang Zhiyong.Practice of Process for Improving Yield of Seamless Pipe Hot-Rolled by 114CPE Mill[J].Special Steel,2009,30(6):29-31. |
| |
| Authors: | Zhuo Zhao Hang Naiqing Cheng Xianglong Duan Jiatian Kang Zhiyong |
| |
| Affiliation: | 1Collegeof Materials and Metallurgy,Wuhan Universityof Science and Technology,Wuhan 430081:
2Hanyang Steel Rolling Plant,Wuhan Iron and Steel,Wuhan 430035 |
| |
| Abstract: | In light of the problem of low yield of pipe for petroleum produced by Φ114mm cross roll piercing elongation(CPE)mill,an analysis on production process flow sheet has been carried out. It is obtained that hot-sawing on pipe in middle procedure and hot-cutting ends are two factors led to low yield. With adopting the improved alignment method as pipe moved to cooling bed and the pointing process,the comprehensive yield of Φ73.0 mm×5.5 mm and P88.9 mm×
6.5 mm pipes for petroleum increases to84.5%~85.0% from original 78% |
| |
| Keywords: | CPE Mill Bush Bench Mandrel Pointing Process Yield |
| 本文献已被 万方数据 等数据库收录！ |
| 点击此处可从《特殊钢》浏览原始摘要信息 |
|
点击此处可从《特殊钢》下载全文 |
|
