模板剂对MCM-41介孔分子筛结构的影响 |
| |
引用本文: | 朱文杰,;李明明,;周阳,;马文会,;于洁,;谢克强. 模板剂对MCM-41介孔分子筛结构的影响[J]. 纳米科技, 2014, 0(4): 45-50 |
| |
作者姓名: | 朱文杰, 李明明, 周阳, 马文会, 于洁, 谢克强 |
| |
作者单位: | [1]昆明理工大学环境科学与工程学院,云南昆明650500; [2]昆明理工大学真空冶金国家工程实验室,云南昆明650093 |
| |
基金项目: | 国家自然科学基金项目(U1137601),昆明理工大学分析测试基金项目(2011300) |
| |
摘 要: | 以微硅粉为硅源,利用水热合成法成功制备出MCM-41介孔分子筛,利用XRD、N2吸附曲线和TEM等测试方法对样品进行了表征,结果表明,模板剂的用量对样品的结构具有显著的影响,当CTAB/SiO2的摩尔比为0.15时,样品的结构有序性最高;混合模板剂可明显提高样品的比表面积和孔容,合成的MCM-41介孔分子筛比表面积从299m2/g提高到837.3m2/g,孔容从0.051cm。/g提高到0.79cm3/g。
|
关 键 词: | 微硅粉 MCM-41 水热合成 混合模板剂 |
Effects of Surfactant on Synthesis of MCM-41Mesoporous Sieves with Silica Fume |
| |
Affiliation: | ZHU Wen-jie, LI Ming-ming, ZHOU Yang, MA Wen-hui, YU Jie, XIE Ke-qiang ( 1. National Engineering Laboratory of Vacuum Metallurgy, Kunming University of Science and Technology, Kunming 650500, China ) (2. Faculty of Environmental Science and Engineering, Kunming University of Science and Technology, Kunming 650093, China ) |
| |
Abstract: | Using the silica fume as silica source, the MCM-41 mesoporous silica materials were successfully synthesized. The as-synthesized samples are characterized by XRD, N2 adsorption desorption and TEM. The results show that the CTAB/SiO2 molar ratio has a direct influence on the structure of samples. The samples with highest crystallinity and good crystalline shape were obtained when the CTAB/SiO2 molar ratio is 0.15; the mixed surfaetants can obviously improve the surfaee area of samples from 299m2/g to 837.3m2/g, and the pore volume from O.051cm3/g to 0.79cm3/g. |
| |
Keywords: | silica fume MCM-41 mixed surfactants hydrothermal synthesis |
本文献已被 维普 等数据库收录! |
|