| Fe—Mn—Si—Cr—Ni—C形状记忆合金回复应力的研究 |
| |
| 引用本文： | 李宁,李平全.Fe—Mn—Si—Cr—Ni—C形状记忆合金回复应力的研究[J].功能材料,1998,29(6):648-650. |
| |
| 作者姓名： | 李宁 李平全 |
| |
| 作者单位： | 四川联合大学金属材料系!成都，610065(李宁，文玉华，陈孟诗)，西安石油管材研究所!西安，710061(李平全，刘应来，马颖丽) |
| |
| 摘 要： | 研究了预应变量、加热和冷却工艺对FeMn－Si-Cr－Ni－C形状记忆合金回复应力的影响。结果表明，当预应变量小于3％～4％时，随应变量的增加，回复应力增加。大于3％～4％后，则下降。同一温度下，冷却过程的回复应力大于加热过程的回复应力。停止加热时的温度越高，冷却过程中的回复应力越大。
|
| 关 键 词： | 形状记忆合金 预应变量 回复应力 |
The Study of the Recovery Stress on Fe-Mn-Si-Cr-Ni-C Shape Memory Alloy |
| |
| Li Ning ,Wen Yuhua ,Chen Mengshi ,Li Pingquan, Liu Yinglai,Ma Yingli.The Study of the Recovery Stress on Fe-Mn-Si-Cr-Ni-C Shape Memory Alloy[J].Journal of Functional Materials,1998,29(6):648-650. |
| |
| Authors: | Li Ning Wen Yuhua Chen Mengshi Li Pingquan Liu Yinglai Ma Yingli |
| |
| Abstract: | The effect of the pre-strain and technique of heating and cooing on the recovery stress of Fe-Mn-Si-CrNi-C shape memory alloy has been studied. The results show that the recovery stress increases with increasing of thepre-strain when it is less than 3% ~ 4%. It is the opposite when prestrain is higher that 3% ~ 4%. At the sametemperature, the recovery stress in the cooling process is greater than that in the heating process. The higher the temperature of cooling is, the greater the recovery stress is. |
| |
| Keywords: | shape memory alloy pre-strain recovery stress |
| 本文献已被 CNKI 维普 等数据库收录！ |
