Punching Shear Behavior of Fiber Reinforced Polymers Reinforced Concrete Flat Slabs: Experimental Study |
| |
Authors: | Abdel Wahab El-Ghandour Kypros Pilakoutas Peter Waldron |
| |
Affiliation: | 1Researcher, The Univ. of Sheffield, Dept. of Civil and Structural Engineering, Sir Frederick Mappin Building, Mappin Street, Sheffield?S1?3JD?UK; currently, Assistant Professor, Dept. of Structural Engineering, Ain Shams Univ., Cairo, Egypt. 2Reader, The Univ. of Sheffield, Dept. of Civil and Structural Engineering, Sir Frederick Mappin Building, Mappin St., Sheffield?S1?3JD?UK. 3Professor, Pro-vice Chancellor, The Univ. of Sheffield, Dept. of Civil and Structural Engineering, Centre for Cement and Concrete, Mappin Street, Sheffield, S1?3JD, UK.
|
| |
Abstract: | This paper presents the results of a two-phase experimental program investigating the punching shear behavior of fiber reinforced polymer reinforced concrete (FRP RC) flat slabs with and without carbon fiber reinforced polymer (CFRP) shear reinforcement. In the first phase, problems of bond slip and crack localization were identified. Decreasing the flexural bar spacing in the second phase successfully eliminated those problems and resulted in punching shear failure of the slabs. However, CFRP shear reinforcement was found to be inefficient in enhancing significantly the slab capacity due to its brittleness. A model, which accurately predicts the punching shear capacity of FRP RC slabs without shear reinforcement, is proposed and verified. For slabs with FRP shear reinforcement, it is proposed that the concrete shear resistance is reduced, but a strain limit of 0.0045 is recommended as maximum strain for the reinforcement. Comparisons of the slab capacities with ACI 318-95, ACI 440-98, and BS 8110 punching shear code equations, modified to incorporate FRP reinforcement, show either overestimated or conservative results. |
| |
Keywords: | Punching Fiber reinforced polymers Slabs Shear strength |
|
|