Development of a new spindle motor for a hard disk drive

A new spindle motor is developed with a sloped permanent magnet (PM) for a hard disk drive (HDD). In a conventional spindle motor, a pulling plate is installed at the stationary part under the rotating PM to pull down rotating bodies. This axial force is required for stable operation of the spindle motor using a hydrodynamic bearing. However, the pulling plate has considerable iron loss and a negative torque opposing the direction of rotation due to the induced eddy currents. Our proposed model has a sloped PM surface to generate the required axial force as well as torque without the pulling plate. Optimal design is carried out by a response surface methodology, and the new spindle motors are prototyped. The resulting electrical and mechanical performance of the prototyped motors is compared with that of conventional models, showing the possibility of adapting the proposed model for an HDD spindle motor.