| 合成温度对聚晶金刚石的影响 |
| |
| 引用本文： | 张健琼,姚一飞,沈翔,罗锡裕. 合成温度对聚晶金刚石的影响[J]. 金刚石与磨料磨具工程, 2009, 0(1) |
| |
| 作者姓名： | 张健琼 姚一飞 沈翔 罗锡裕 |
| |
| 作者单位： | 安泰科技股份有限公司,北京,100081 |
| |
| 基金项目： | 北京市科学委员会高成长企业自主创新科技专项资助项目 |
| |
| 摘 要： | 本文利用六面顶压机,在高温高压条件下进行了合成聚晶金刚石的实验。研究了合成温度对聚晶金刚石晶粒大小和黏结剂分布的影响。用扫描电子显微镜观察了相同压力、不同合成温度条件下合成出的聚晶金刚石的断口形貌。结果表明,合成温度高时(1 650℃),晶粒尺寸稍小,金属黏结剂分布均匀;合成温度低时(1 590℃),晶粒尺寸稍大,金属黏结剂分布不均匀。这可能是因为,当温度高时,金刚石生长驱动力小,生长速度稍慢,在相同时间条件下,晶粒尺寸稍小。同时温度稍高,黏结剂流动性增强,更有利于其均匀分布。
|
| 关 键 词： | 金刚石聚晶 合成温度 晶粒 |
Influence of synthesis temperature on polycrystalline diamond |
| |
| Zhang Jianqiong,Yao Yifei,Shon Xiang,LUO Xiyu. Influence of synthesis temperature on polycrystalline diamond[J]. Diamond & Abrasives Engineering, 2009, 0(1) |
| |
| Authors: | Zhang Jianqiong Yao Yifei Shon Xiang LUO Xiyu |
| |
| Affiliation: | China Iron & Steel Research Institute Group;Beijing 100081;China |
| |
| Abstract: | In this article,the influence of synthesis temperature on polycrystalline diamond(PCD) was investigated by the experiment of PCD synthesizing under high pressure and high temperature(HPHT) in a cubic press.The fractograph of synthesis PCD sample was observed by SEM at the same pressure and different synthesis temperatures.The results indicated that,the synthesis temperature affected the grain size of PCD and the distribution of the metal bond in such a rules as,the higher the temperature,the smaller the gra... |
| |
| Keywords: | PCD synthesis temperature grain size |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
