EFFECT OF ADDITIONAL ALLOYING ELEMENTS ON THE PROPERTIES OF SINTERED MANGANESE STEELS

Abstract

Sintered alloys based on the Fe-Mn system have been investigated by using single-pressing and double-pressing techniques. Fe-Mn (Mn up to 8 wt.-%) and Fe-Mn-C (C up to 1·4 wt.-%) alloys were prepared both with manganese as an electrolytic powder and with a Fe-Mn master alloy. The influence of sintering temperature and sintering time on mechanical properties and homogenization is discussed. The effect of the additional alloying elements Cr, Mo, eu, and of their combinations on mechanical properties has been determined. Further investigations were carried out with a Fe-Mn-Cr-Mo-C master alloy. The optimum single-pressed and double-pressed alloy (Fe with Mn 0·8, Cr 0·8, Mo 0·8, and total C 0·6%) has a tensile strength (σ_B) of >700 N/mm². Optimum alloys of all investigated systems were hot-forged and their mechanical properties are compared with those of single- and double-pressing techniques. The alloys were heat-treated and their tempering behaviour determined. Jominy standard tests were carried out to determine hardenability of the porous sintered materials.