| 旋压带轮的非线性有限元分析 |
| |
| 引用本文： | 袁晓红,马力,曾娟,成耀龙,张子春.旋压带轮的非线性有限元分析[J].武汉大学学报(工学版),2007,40(4):113-116. |
| |
| 作者姓名： | 袁晓红 马力 曾娟 成耀龙 张子春 |
| |
| 作者单位： | 武汉理工大学汽车工程学院,湖北,武汉,430070 |
| |
| 摘 要： | 建立了旋压带轮的有限元非线性计算模型,结合旋压带轮的几种典型工况进行非线性接触分析,得到4种典型工作位置的整体应力分布、接触应力分布及整体变形,并对带轮进行了动态特性分析,将其对应的临界转速与工作转速进行比较分析.该工作对旋压带轮的非线性有限元分析的研究与开发具有一定的理论参考和实际应用价值.
|
| 关 键 词： | 旋压带轮 非线性有限元分析 动态特性分析 |
| 文章编号： | 1671-8844（2007）04-0113-04 |
| 修稿时间： | 2007-03-14 |
Nonlinear finite element analysis of spin pulley |
| |
| YUAN Xiaohong,MA Li,ZENG Juan,CHENG Yaolong,ZHANG Zichun.Nonlinear finite element analysis of spin pulley[J].Engineering Journal of Wuhan University,2007,40(4):113-116. |
| |
| Authors: | YUAN Xiaohong MA Li ZENG Juan CHENG Yaolong ZHANG Zichun |
| |
| Affiliation: | Automotive School, Wuhan University of Technology, Wuhan 430070, China |
| |
| Abstract: | The nonlinear finite element model of the spin pulley is established.In combination with several typical working conditions,the integral stress distribution,contact stress distribution and whole deformation of the spin pulley are calculated in given parameters at four typical positions.And the dynamic characteristic analysis of the pulley is compared with its working speed.The nonlinear finite element analysis for the spin pulley offers references for further research. |
| |
| Keywords: | spin pulley nonlinear finite element analysis dynamic characteristic analysis |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
