The Effect of La2O3 Addition on Sol–Gel Derived Mullitization

Monophasic gel with stoichiometric 3Al₂O₃·2SiO₂ composition and gels with 0.99, 1.96, and 2.91 mol% La₂O₃ added were sol–gel derived. The crystallization path, structure evolution, microstructure, and morphology of calcined premullite powders and sintered ceramic bodies have been investigated as a function of La₂O₃ content and sintering temperature. In addition to mullite, spinel phase at about 980°C, and α‐alumina at above 1000°C were determined; however, neither La₂O₃ nor La‐related compounds had crystallized. The La₂O₃ predominately incorporated into the glassy phase, enhanced with La₂O₃ level, which affected both mullite structure and composition, as confirmed by electron microscopy, Rietveld structure refinement, determination of unit cell parameters, electron microscopy, and achieved density of the sintered bodies. Increased thermal treatment changes the alumina/silica ratio in mullite (towards 3:2 below 1200°C, and toward 2:1 above), and decreases the mullite/amorphous ratio. Sintered dense ceramic bodies revealed a positive densification effect and increased sinterability as a result of the lanthanum‐induced increase in glassy phase.